INSULATION BLOWER

Description

FORCE 1 BLOWER:

Height 41 inches
Width 32.25 inches
Weight 177 pounds
Hopper Capacity
4.25 cu. ft. — 25 pounds
Hose Size 2.5 inches x 50 ft
Blower 2–stage, 8 amps @ 3 PSI
Drive Motor – .75 hp – 8.4 amps
Transmission Custom, Direct Drive
Airlock – 6.5″ x 7.25″ Opening, Steel, 6-Vae, Cast Urethane Seals
Electric 115V/220V 50/60Hz
Power Requirements One 20 amp, 115V circuit
Agitator 3–vane, CRS
Wheels – 6″

1 BAG INSULATION: 23 LBS

TO OBTAIN THERMAL RESISTANCE OF:
R-29:
MAX SQ FT PER BAG – 26, MIN THICKNESS – 7-1/4″.
R-22:
MAX SQ FT PER BAG – 34, MIN THICKNESS – 5-1/2″.
R-16:
MAX SQ FT PER BAG – 47, MIN THICKNESS – 4″.
R15:
MAX SQ FT PER BAG – 52, MIN THICKNESS – 3-5/8″
R14:
MAX SQ FT PER BAG – 53,
MIN THICKNESS – 3-1/2″

ADDITIONAL HOSE UP TO 150FT AVAILABLE AT EXTRA CHARGE

CAN USE UP TO 100FT OF 2 1/2″ HOSE BUT CAN ONLY USE 2″ X 50FT FOR THE ADDITIONAL HOSE TO CREATE 150FT LENGTH

Our FORCE/1 package processes up to 970 lbs of cellulose or 350 lbs of fiberglass per hour and weighs 177 lbs. The durability of this unit is enhanced with urethane seals, a direct drive transmission, and polyethylene construction which resists dents & dings, allowing for an attractive system appearance over years of use. This system provides ease of transportation to the job site in addition to timely installation of attic insulation – either cellulose or fiberglass — at 3/4 of an hour for R-19 in a 1,000 square foot attic.