Description
MODEL # 3M40C-1
Conveyor
Width 15 inches
Depth 7.5 inches
Weight 160 lbs
Construction Stainless Steel, Aluminium / Composite
Speed 33 FT/Min
Nominal Load 280 lbs
Maximum Inclination 45°
Nominal Capacity 25 Ton/Hour (16 CU YDS/HR)
Voltage 110AC
Belt
Material Heavy fabric reinforced PVC (EMSHA & flame retardant option)
Width 12 inches
Thickness 0.125 inches
Fastener Multi-tooth stainless steel (Mining specification option)
Standard Cleats 0.75” @ 12” centres / 20mm @ 300mm centres
Electrical
Voltage 110 V or 230 V standard. 200-600 V Three Phase option
Output Power 370 W
Frequency 50/60 Hz
Control Voltage 24V AC
Safety System Monitored loop including overload sensors
Motor Type Single phase induction motor (3 Phase/hydraulic options)
Motor Protection Motor enclosed to IP66 rating with a thermal overload
Control System
Number of Miniveyor units from single power source
110 Volt Control Box 3
Must haev terminator plug at end of all conveyor runs
Only operates on 15AMP breaker/extension cord. Can be no longer then 50ft and have to be 10 gauge
ACCESSORIES AVAILABLE:
*CLAMP KITS – MAXIMUM RUN 28FT (2 KITS)(1 FT LENGTH LOST PER KIT)
*10FT SIDE RAILS
*HOPPER W/5FT SIDE RAILS
The Miniveyor™ family of portable conveyors represents one of the most powerful and flexible solutions for the rapid deployment of a temporary conveyor system. Only 20 cm (8”) high and capable of lying on the ground, it can be utilised to excavate below ground, through windows or in other confined spaces. And that’s not all Miniveyor™ does not leave a footprint so it’s ideal for landscaping and archaeology. With an aircraft grade aluminum frame and a stainless steel slider bed, the Miniveyor™ is built to last. These are the only units in their class that have reversible belts and composite filled cores to add strength whilst saving weight.
Reviews
There are no reviews yet.