SCRAP-R-TACH SYSTEM 6 PC

Description

INDUSTRIAL FLOOR COATINGS REMOVAL SYSTEM TO REMOVE A WIDE VARIETY OF URETHANES, EPOXIES, PAINTS & OTHER ENCRUSTED FORMATIONS.
THE SCRAP R TACH USES 12 – 8 SIDED TUNGSTON CARBIDE INSERTS THAT ROTATE TO PROVIDE 8 SHARP SCRAPING EDGES.

***** THEY ARE RENTED AS FOLLOWS: *****
THERE ARE 6 BLOCKS PER GRINDER SETUP
2 INSERTS PER BLOCK X 6 BLOCKS = 12 INSERTS TOTAL
EACH INSERT HAS 8 SIDES
MINIMUM RENTAL IS 1 SIDE

The SCRAPE-R-TACH floor coatings removal system utilizes two Tungsten Carbide inserts providing 16 wear edges. Designed for removing a wide range of urethanes, rubber membranes, material buildups, paints, masticd, etc. Production rates of up to several hundred square feet per hour the SCRAPE-R-TACH system bring a quick return on investment.

* Material:Tungston carbide
* Application:Removal of thicker layers of materials, including: adhesives, epoxies, urethanes and paints.
* Hints:Tungsten carbide inserts feature 8 wear edges. Test procedure: scrape blunt file edge against surface to determine effectiveness. Use water and sand slurry to increase productivity on extrudable materials. Add weight to grinder to increase productivity.
* Service Life:Variable from 1 to 8 hours per wear edge.
* Dimensions:(1) Quad-Sert™ insert: 1 inch x 1 inch